Stone fabricators and installers Sarasota, Florida

Stone slab lifter rental in Sarasota, FL.

Sarasota is a next-day run from our Tampa yard. Book the day before and the machine is on site in the morning, with a ramp if you ask for one. It sets the book-matched wall, the waterfall island, and the ten-foot porcelain slab the Sarasota remodel keeps asking for, with one person on a remote.

Get a quote (855) 677-7368

DeliveryNext-day to Sarasota

FleetTwo units, up to 2,200 lb

OperatorOne person, by remote

RampIncluded, just ask

QuoteBack within two hours

Smartlift SL609 HLE RT vacuum lifter with four suction pads on a lifting frame

We know the Sarasota stone job.

Four things that are true about this work here specifically.

Next-day down I-75
A straight run from Tampa. Book the day before and it is there in the morning, subject to the unit being available.
The luxury remodel
Longboat Key, Siesta Key, Bird Key, and Lakewood Ranch. Book-matched feature walls, full-height backsplashes, waterfall islands, and a client who will notice.
Large-format porcelain
Sarasota shops sell a lot of it, and a 10 ft 6 slab is the piece that does not go up a stair. The machine holds it flat and still while one person lines it up.
Bayfront condos
Finished lobbies and passenger elevators. Get the elevator rating in writing, and tell us it is a finished floor. Non-marking wheels are an available option.

What goes wrong in a Sarasota house.

The slab is expensive, the floors are finished, and the client is home.

The slab you cannot replaceA book-matched pair or a large-format porcelain panel is weeks out. Drop one and the whole wall waits.
The stairA ten-foot-six panel does not pivot through a house landing. That is geometry, not strength, and no amount of crew fixes it.
How it looksIn a house with the family home, one person walking a slab in on a remote reads like white glove. Four people wrestling it past the furniture does not.

The one question we ask.

What is the heaviest single piece, how high does it have to go, and how does it get into the building?

The piece: Weight and size of the heaviest single slab. The pads need a clean, sealed, non-porous face. Polished, honed, and leather all hold.
The height: 13 ft 11 in of lift. Capacity drops as the arm goes out, so tell us the reach as well as the weight.
The way in: 32.7 in to drive through, 5 ft 8 in to set the legs and work. Curb, steps, lawn, or elevator: tell us, and we bring the ramp or tell you it will not work.

Send a photo of the opening if it helps. We confirm the fit before you book, not after.

Will it hold your piece?

Find your material, check the weight. Both units handle everything on this list.

Stone at the sizes that cause trouble. Manufacturer figures where they publish one.
Material	Typical size	Weight	Fits
Porcelain slab, 6 mm	10 ft 6 x 5 ft 3	148 lb	Either unit
Porcelain slab, 12 mm	10 ft 6 x 5 ft 3	326 lb	Either unit
Porcelain slab, 20 mm	10 ft 6 x 5 ft 3	540 lb	Either unit
Large-format panel, 20 mm	10 ft 8 x 5 ft 4	578 lb	Either unit
Granite or quartzite, 3 cm	jumbo slab	about 1,090 lb	Either unit

Working out your own: 3 cm granite runs about 16.6 lb a square foot. Multiply your slab. Capacity depends on how far the arm has to reach, so send the weight and the distance and we will confirm the fit before you book.

The unit you’ll get.

Under 1,300 lb, the SL609 goes on the truck. Heavier, or a longer reach, and it is the SL1009.

Unit 01

SL609 HLE RT

Up to1,320lb

Lifting height: 13 ft 11 in
Arm extension: 5 ft 3 in, two-stage

Series: Outdoor
Powered rotation: Yes, that’s the RT
Placement: Tilt, rotate, 4 in side shift
Memory positions: Yes, for repeat installs
Drive: Four wheels, front-wheel drive
Runtime: A full workday, charges on 110V
Suction pads: Four 16 in pads, dual circuit
Width to drive through: 32.7 in
Width to work: 5 ft 8 in, legs down
Ramp: Included, just ask

Drives through a standard 36 inch doorway with the legs up. It needs 5 ft 8 in to set the legs down and work, so measure the room as well as the door.

See both units and what’s included

Get it to Sarasota.

A few fields. An itemized quote comes back within two hours, 9 to 5, seven days a week.

First name

Last name

Company

Phone

Jobsite zip

When do you need it?

Which unit

What are you lifting?

The weight and size of your heaviest piece is what decides the machine. Tell us that and we will pick for you.

Or call (855) 677-7368

We use this to quote your job. We do not sell your information and we do not send newsletters.

Sarasota questions.

The five that come up on nearly every call.

How fast can you get a slab lifter to Sarasota?

Next-day. Book the day before and it is on site in the morning, subject to the unit being available. If your install date is fixed, book early.

Do you cover Bradenton, Venice, and Lakewood Ranch?

Yes. Same next-day run. If you have work across Sarasota, Bradenton, and Venice in the same window, tell us and we price it as one booking rather than three.

Will it hold a 10-foot porcelain slab?

Yes. A 12 mm slab in the 10 ft 6 by 5 ft 3 format is about 326 lb, and the machine lifts 1,320 lb close to the mast. The size and the fragility are the problem, not the weight, and the pads hold the face flat.

Can it work on a finished floor?

Yes, with the wheels sorted. Standard tires can mark, so tell us it is a finished floor when you book. Non-marking wheels are an available option, and the machine is battery-electric, so no fumes.

Do I need a trained operator?

No. Our driver walks your crew through the controls on drop-off. If you can drive a pallet jack, you can run a Smartlift.

More on this.

Up to the trade page and the city, across to the other metros, and the questions that come up first.

Got a set on the calendar in Sarasota?

Tell us the weight and the zip. You’ll have an itemized quote back within two hours.